Knowledgebase: Ram Trouble shooting
Step By Step Troubleshooting RAM
Posted by Kenneth Larkin on 26 February 2007 03:32 PM
It's rare but RAM modules can cause problems. Unfortunately, it's not always certain that the memory errors being reported by your system is actually due to problems with the RAM modules. Even worse is that an unstable system can be due to many problems including RAM failure.|
Step 1: Back up all important files and data.
You should be doing this on a regular basis anyway but if your computer is showing signs of failure don't wait any longer to perform this job.
Step 2: Start simple and analyze the problem.
â€¢ Have you added or replaced RAM? Is it installed properly?
â€¢ Have you moved the computer? RAM modules can come loose.
â€¢ Is it a new computer? RAM modules might not have been inserted properly.
â€¢ Have you installed any new hardware upgrades?
â€¢ Have you installed new software or might there be a virus problem?
â€¢ Have you changed or installed patches for your operating system?
â€¢ Do you have the correct RAM type?
â€¢ Is the RAM module connectors tin or gold?
â€¢ When your computer starts (boots) does it report the correct amount of RAM?
â€¢ Does your system properties report the correct amount of RAM?
Any one of these can indicate a problem with the RAM module or something connected with it.
WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. Only work inside the computer case when the power has been switched off and disconnected. Never open the power source.
excellent online documentation.
Step 5: Do you have the correct RAM?
Check the MOBO or computer documentation for the type of memory module you should be using. Compare this with the memory module you have purchased. Look at the memory module; does the information on the module match with the sales invoice (have they sent you the correct product)? If you bought a name brand computer has the RAM purchased been tested on that particular computer? This can be an issue with DellÂ® and other computers. NOTE: Before the computer case is opened make sure that power is switched off and disconnected, press and hold the power button for 30 seconds to ensure residual power is lost and make sure that you are grounded to avoid damage due to static electricity. Use a grounding wrist strap or touch the metal case to discharge static electricity.
Now open the computer case to check the following.
Step 6: Is the RAM installed correctly?
Some MOBOs must have their slots filled in a special sequence. Sometimes DIMMs must be in a specific sequence.
Step 7: Remove the memory modules from their slots.
Take the opportunity to clean the slots on the motherboards and the memory module connectors. Use compressed air to blow dust away and clean contacts with a soft cloth. Don't use a vacuum cleaner if it touches any component it may create a short and cause damage to the motherboard or other components. Don't use solvent that may attract dust and never poke things like cotton buds in to slots. Check the memory module and memory slot contacts. They are either tin or gold. The color will tell you which they are. Mixing tin and gold can result in corrosion that prevents proper contact. Look for any sign of physical damage to the memory module, memory slots or the motherboard. With the last two you are looking at replacing the motherboard.
Step 8: Reseat the memory modules.
You should hear an audible click when they are in place. Do not use too much force to reseat the memory module in to the slot this can cause damage to the module, slot or motherboard. If you are still experiencing trouble try the following.
Step 9: Swap modules in to different slots.
If you have more than one memory module try different combinations or one at a time. This might identify a faulty component.
Step 10: If you have changed or upgraded the memory modules try taking your system back to its original configuration.
Does it still work? If yes then suspect a fault or compatibility problem. If no!! Sorry but you may have damaged the motherboard.
Step 11: If your compute isn't recognizing all of your RAM it might be a problem with the BIOS.
Check with the motherboard or PC manufacturerâ€™s web site for possible BIOS upgrades.
Step 12: Check for viruses with an up to date virus checker.
Some viruses cause problems that look like memory errors.
Step 13: Try removing recently installed hardware or software.
Sometimes operating systems misinterpret problems as memory related.
Step 14: If you have tried everything a still suspect a faulty RAM module there are several good programs that will test your computer.
Typically you must create a boot disk to use when restarting your computer. This helps eliminate the possibility that it's operating system or other software problems. Three options are:
â€¢ Gold memory (www.goldmemory.cz).
â€¢ Memtest86 (www.memtest86.com)
â€¢ PCTechnician (www.windsortech.com).
If you have a Dell computer they have their own troubleshooting software that is worth using.